Vous n'avez pas enchéri sur cette enchère.
250 ct Fire Opal Rough from Honduras
- UGS
- Dimensions (mm)
- 83.000 x 35.500 x 23.000mm
- Poids (cts)
- 250.000
- Taper
- Rough, Specimen
- Couleurs
-
-This is a piece of rough fire opal from a new finding in Honduras.
-It is all wrapped in a natural protective soil layer. You can see the color only on one of the corners of the stone, but the stone is all opal.
-I collected several kilograms in different sizes and weighs (up to 1 kilogram).
-This stone is untreated and dry.
-Has good color, with some transparency.
-Has fractures.
-A skilled cutter will be able detach several pieces from the cracks and facet them.
-All pictures are taken under natural sunlight when STONES ARE DRY.
-I checked the refractive index of a polished stone and it is 1.44 to 1.45.
-In his book ‘The World of Opals’ (1997), Allan W. Eckert writes: “San Antonio area mines are most productive of a very light-colored precious fire opal that most resembles the Mexican variety (...). Other opals of this type occur at a number of locations throughout the country (...). The stones here, mainly found loose on the ground surface, have a colorless transparent center which turns to transparent citrine yellow and, finally, near the outside edges to a transparent light brownish-orange. The majority is used for faceting purposes”.
-And Tom R. Barbour, C.G. wrote in The Lapidary Journal (April 1965): “Produced by hand and as yet on a small scale, there is in Honduras opal of almost every description including all of that found in Australia (...). Because of the very difficult mountainous country with little or no roads, Honduras has not been developed. However, with the promise of roads in this country in the comparatively near future, we hope it will turn into one of the main gem and opal producing areas of the world (...). In the first group we will include common opal or, in other words, that which does not display colors when viewed in reflected light. The ‘Mexican fire opal’ type is found in several places throughout Honduras (...). This opal is found in weathered veins of from one-fourth of an inch up to six inches in width. The outside, next to the matrix, is a light orange brown turning to lighter shades then to a citrine color with a clear center. Most of this type (...) is fractured into pieces from one-half inch to about two inches of clear faceting material”.
- UGS
- Dimensions (mm)
- 83.000 x 35.500 x 23.000 mm
- Poids (cts)
- 250.000
- Taper
- Rough, Specimen
- Couleurs
-
-This is a piece of rough fire opal from a new finding in Honduras.
-It is all wrapped in a natural protective soil layer. You can see the color only on one of the corners of the stone, but the stone is all opal.
-I collected several kilograms in different sizes and weighs (up to 1 kilogram).
-This stone is untreated and dry.
-Has good color, with some transparency.
-Has fractures.
-A skilled cutter will be able detach several pieces from the cracks and facet them.
-All pictures are taken under natural sunlight when STONES ARE DRY.
-I checked the refractive index of a polished stone and it is 1.44 to 1.45.
-In his book ‘The World of Opals’ (1997), Allan W. Eckert writes: “San Antonio area mines are most productive of a very light-colored precious fire opal that most resembles the Mexican variety (...). Other opals of this type occur at a number of locations throughout the country (...). The stones here, mainly found loose on the ground surface, have a colorless transparent center which turns to transparent citrine yellow and, finally, near the outside edges to a transparent light brownish-orange. The majority is used for faceting purposes”.
-And Tom R. Barbour, C.G. wrote in The Lapidary Journal (April 1965): “Produced by hand and as yet on a small scale, there is in Honduras opal of almost every description including all of that found in Australia (...). Because of the very difficult mountainous country with little or no roads, Honduras has not been developed. However, with the promise of roads in this country in the comparatively near future, we hope it will turn into one of the main gem and opal producing areas of the world (...). In the first group we will include common opal or, in other words, that which does not display colors when viewed in reflected light. The ‘Mexican fire opal’ type is found in several places throughout Honduras (...). This opal is found in weathered veins of from one-fourth of an inch up to six inches in width. The outside, next to the matrix, is a light orange brown turning to lighter shades then to a citrine color with a clear center. Most of this type (...) is fractured into pieces from one-half inch to about two inches of clear faceting material”.
Fournisseur d'expédition | Expédition vers :pays | Expédition dans le reste du monde |
---|---|---|
Standard Shipping - Tracked | $10.00 / : jours jours | $10.00 / : jours jours |
:pays
:fournisseur bénéficie d'une réduction de :prix sur les commandes avec :quantité ou plus d'articles
Reste du monde
:fournisseur bénéficie d'une réduction de :prix sur les commandes avec :quantité ou plus d'articles
|
||
Express Shipping | $10.00 / : jours jours | $10.00 / : jours jours |
Reste du monde
:fournisseur bénéficie d'une réduction de :prix sur les commandes avec :quantité ou plus d'articles
|
-
Positif
First class service
-
Positif
-
Positif
-
Positif
Timely delivery well packaged. Awesome specimen!
-
Positif
Pourquoi les utilisateurs se surenchérissent-ils ?
Lorsqu'une enchère est placée, il s'agit du montant maximum qu'un utilisateur est prêt à enchérir pour le produit. Notre système enchérira ensuite automatiquement au nom de cet utilisateur, augmentant progressivement l'enchère pour maintenir sa position d'enchérisseur le plus élevé, jusqu'au maximum spécifié.
Lorsqu'il y a une icône indiquant "Enchère automatique", cela signifie que notre système place activement des enchères pour l'utilisateur en fonction de son enchère maximale. Cela peut donner l'impression que les utilisateurs surenchérissent eux-mêmes, mais c'est simplement le résultat de la mise à jour de l'enchère par le système pour refléter la limite maximale des utilisateurs.