Opals
Gemstones
Jewelry
Coins
$58.00 USD
Cijena
3357
5
108.00 CTS ANDAMOOKA MATRIX ROUGH SLABS [BY9584]
3357
5
- SKU
- Dimenzije (mm)
- 42.000 x 42.000 x 6.000mm
- Težina (cts)
- 108.000
- Tip
- Rough
- Boje
-
ANDAMOOKA MATRIX ROUGH
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural opal treated so it becomes black- We purchase large quanites of rough material and slab it and then treat it so you can get a idea of how it will face. There is a large amount of wastage in preparing this material. You can cut into earrings ring or pendant stones or leave as specimens but you will have to re treat if you take too much away. Check that there isnt another colour bar in the rough you can expose that may be better than the top. This is a type 1 andamooka matrix called Rainbow opal matrix.
You may see black spots which is usually blackened sugar which will come off.
Mined in Andamooka Sth Australia
We havve taken the photo of the rough wet!
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in aceton for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results if the material is porous
-
POLISHING
The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural opal treated so it becomes black- We purchase large quanites of rough material and slab it and then treat it so you can get a idea of how it will face. There is a large amount of wastage in preparing this material. You can cut into earrings ring or pendant stones or leave as specimens but you will have to re treat if you take too much away. Check that there isnt another colour bar in the rough you can expose that may be better than the top. This is a type 1 andamooka matrix called Rainbow opal matrix.
You may see black spots which is usually blackened sugar which will come off.
Mined in Andamooka Sth Australia
We havve taken the photo of the rough wet!
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in aceton for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results if the material is porous
-
POLISHING
The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
- SKU
- Dimenzije (mm)
- 42.000 x 42.000 x 6.000 mm
- Težina (cts)
- 108.000
- Tip
- Rough
- Boje
-
ANDAMOOKA MATRIX ROUGH
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural opal treated so it becomes black- We purchase large quanites of rough material and slab it and then treat it so you can get a idea of how it will face. There is a large amount of wastage in preparing this material. You can cut into earrings ring or pendant stones or leave as specimens but you will have to re treat if you take too much away. Check that there isnt another colour bar in the rough you can expose that may be better than the top. This is a type 1 andamooka matrix called Rainbow opal matrix.
You may see black spots which is usually blackened sugar which will come off.
Mined in Andamooka Sth Australia
We havve taken the photo of the rough wet!
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in aceton for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results if the material is porous
-
POLISHING
The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural opal treated so it becomes black- We purchase large quanites of rough material and slab it and then treat it so you can get a idea of how it will face. There is a large amount of wastage in preparing this material. You can cut into earrings ring or pendant stones or leave as specimens but you will have to re treat if you take too much away. Check that there isnt another colour bar in the rough you can expose that may be better than the top. This is a type 1 andamooka matrix called Rainbow opal matrix.
You may see black spots which is usually blackened sugar which will come off.
Mined in Andamooka Sth Australia
We havve taken the photo of the rough wet!
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in aceton for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results if the material is porous
-
POLISHING
The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
| Pružatelj usluge dostave | Dostava u Australia | Dostava u ostatak svijeta |
|---|---|---|
| FedEx | $12.00 / :dani dani | $39.00 / :dani dani |
|
:zemlja
FedEx je snižen na $12.00 na narudžbe s 2 ili više artikala
Ostatak svijeta
FedEx je snižen na $39.00 na narudžbe s 2 ili više artikala
|
||
| Registered Shipping | $9.00 / :dani dani | $16.00 / :dani dani |
|
:zemlja
Registered Shipping je snižen na $9.00 na narudžbe s 2 ili više artikala
Ostatak svijeta
Registered Shipping je snižen na $16.00 na narudžbe s 2 ili više artikala
|
||
sedaopals
Discover the magic of opals at SedaOpals, where every stone tells a unique story. Paul Sedawie, the heart and soul of SedaOpals, began his journey with a humble piece of boulder rough at 14, sparking a lifelong passion for these mesmerizing gemstones. With over 40 years in the opal industry, Paul’s dedication has taken him from the rugged landscapes of Lightning Ridge to prestigious gem shows around the world.
Paul, a former president of the Opal Association and an author of several opal books, shares his vast knowledge and passion with enthusiasts globally. He’s even made the largest donation of opalized fossils and curiosities to the Australian Opal Centre at Lightning Ridge.
At SedaOpals, Paul and his sons offer a meticulously curated collection of opals, each handpicked for its exceptional beauty and character. Whether you’re a seasoned collector or new to the world of opals, you’ll find a stunning array of black opals, boulder opals, and crystal opals to explore.
Join us in celebrating the timeless beauty and craftsmanship of opals. Welcome to SedaOpals, where every opal is a piece of art.
:Grad drzava
Provjereno
:ukupne povratne informacije
-
PozitivanReceived quickly as usual! Thanks so much for the lovely opals and extra goodies!
-
Pozitivan
Received quickly as usual! Lovely opals!! Thank!
5%
Kod kupona SEDADEALS
Vrijedi do
23rd Nov 2024
Revizija
Program Opal Sheriff omogućuje našim članovima da zatraže reviziju bilo kojeg proizvoda, koju dovršava neovisna :kvalifikacija koja procjenjuje točnost opisa artikla i slika.
Detalji dostave
dostava:
$16.00 21 days putem Registered Shipping
Brodovi iz:
Australia
Načini plačanja
Ovaj prodavač dodaje 10.00% porez na transakcije u Australia.
Pregled
Vrsta unosa :
Standard
Identifikacijski broj proizvoda :
923750
Počinje : 6th November 2024 07:10 pm PST
* Sve cijene su u :valuti
