$40.00 USD
Prijs
43 grams high grade fairy opal rough untreated -oxidized [BZ725] cutrm
1815
0
- SKU
- Afmetingen (mm)
- 58.000 x 37.000 x 27.000mm
- Gewicht (cts)
- 215.000
- Type
- Rough
- Kleuren
-
FAIRY OPAL ROUGH
NATURAL UNTOUCHED UNTREATED
NOW YOU CAN HAVE SOME FUN DISCOVERING THE COLOURS.
This is natural untouched fairy opal . This rough has been oxided by time as the out side will be darker than inside but it should treat well and be high yielding with stones once treated. They are ready to be shaped or cut into smaller stones or for earrings etc. We bought a few 44 gallon drums and only selected the pieces showing some colour. There is a large amount of wastage.
It is precious opal embedded in the natural sandstone and mined in Queensland Australia. Only by carbonizing it does it become like black opal. The treatment are listed below
TREATMENTS
--On the opal field the normal treatment is to wrap the stones in aluminum foil with a some sugar and olive oil and throw into the hot coals for 15 minutes in a out side fire. I have tried this with varying success.
-This treatment you could also try with some oil.
You can heat the stones in a oven to 90 degree F for a hour to dry them out
Place gently in a bowl with syrup of sugar. Heat for 8 plus hours but not to boiling as you will loose the water so the sugar seeps in to the stone-i once left for over a week and had good results.
Wrap in aluminum foil and heat to 400 F for 4 hours-you can check earlier. This is best done on a out door bbq kiln or oven.
-You can treated like Andamooka matrix with acid-details are in the learning section on the site.
TREATMENT FOR FAIRY OPAL AND ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in aceton for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
-
POLISHING
This parcel The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
It is similar in appearance to Honduran opal.
NATURAL UNTOUCHED UNTREATED
NOW YOU CAN HAVE SOME FUN DISCOVERING THE COLOURS.
This is natural untouched fairy opal . This rough has been oxided by time as the out side will be darker than inside but it should treat well and be high yielding with stones once treated. They are ready to be shaped or cut into smaller stones or for earrings etc. We bought a few 44 gallon drums and only selected the pieces showing some colour. There is a large amount of wastage.
It is precious opal embedded in the natural sandstone and mined in Queensland Australia. Only by carbonizing it does it become like black opal. The treatment are listed below
TREATMENTS
--On the opal field the normal treatment is to wrap the stones in aluminum foil with a some sugar and olive oil and throw into the hot coals for 15 minutes in a out side fire. I have tried this with varying success.
-This treatment you could also try with some oil.
You can heat the stones in a oven to 90 degree F for a hour to dry them out
Place gently in a bowl with syrup of sugar. Heat for 8 plus hours but not to boiling as you will loose the water so the sugar seeps in to the stone-i once left for over a week and had good results.
Wrap in aluminum foil and heat to 400 F for 4 hours-you can check earlier. This is best done on a out door bbq kiln or oven.
-You can treated like Andamooka matrix with acid-details are in the learning section on the site.
TREATMENT FOR FAIRY OPAL AND ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in aceton for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
-
POLISHING
This parcel The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
It is similar in appearance to Honduran opal.
- SKU
- Afmetingen (mm)
- 58.000 x 37.000 x 27.000 mm
- Gewicht (cts)
- 215.000
- Type
- Rough
- Kleuren
-
FAIRY OPAL ROUGH
NATURAL UNTOUCHED UNTREATED
NOW YOU CAN HAVE SOME FUN DISCOVERING THE COLOURS.
This is natural untouched fairy opal . This rough has been oxided by time as the out side will be darker than inside but it should treat well and be high yielding with stones once treated. They are ready to be shaped or cut into smaller stones or for earrings etc. We bought a few 44 gallon drums and only selected the pieces showing some colour. There is a large amount of wastage.
It is precious opal embedded in the natural sandstone and mined in Queensland Australia. Only by carbonizing it does it become like black opal. The treatment are listed below
TREATMENTS
--On the opal field the normal treatment is to wrap the stones in aluminum foil with a some sugar and olive oil and throw into the hot coals for 15 minutes in a out side fire. I have tried this with varying success.
-This treatment you could also try with some oil.
You can heat the stones in a oven to 90 degree F for a hour to dry them out
Place gently in a bowl with syrup of sugar. Heat for 8 plus hours but not to boiling as you will loose the water so the sugar seeps in to the stone-i once left for over a week and had good results.
Wrap in aluminum foil and heat to 400 F for 4 hours-you can check earlier. This is best done on a out door bbq kiln or oven.
-You can treated like Andamooka matrix with acid-details are in the learning section on the site.
TREATMENT FOR FAIRY OPAL AND ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in aceton for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
-
POLISHING
This parcel The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
It is similar in appearance to Honduran opal.
NATURAL UNTOUCHED UNTREATED
NOW YOU CAN HAVE SOME FUN DISCOVERING THE COLOURS.
This is natural untouched fairy opal . This rough has been oxided by time as the out side will be darker than inside but it should treat well and be high yielding with stones once treated. They are ready to be shaped or cut into smaller stones or for earrings etc. We bought a few 44 gallon drums and only selected the pieces showing some colour. There is a large amount of wastage.
It is precious opal embedded in the natural sandstone and mined in Queensland Australia. Only by carbonizing it does it become like black opal. The treatment are listed below
TREATMENTS
--On the opal field the normal treatment is to wrap the stones in aluminum foil with a some sugar and olive oil and throw into the hot coals for 15 minutes in a out side fire. I have tried this with varying success.
-This treatment you could also try with some oil.
You can heat the stones in a oven to 90 degree F for a hour to dry them out
Place gently in a bowl with syrup of sugar. Heat for 8 plus hours but not to boiling as you will loose the water so the sugar seeps in to the stone-i once left for over a week and had good results.
Wrap in aluminum foil and heat to 400 F for 4 hours-you can check earlier. This is best done on a out door bbq kiln or oven.
-You can treated like Andamooka matrix with acid-details are in the learning section on the site.
TREATMENT FOR FAIRY OPAL AND ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in aceton for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
-
POLISHING
This parcel The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
It is similar in appearance to Honduran opal.
Verzend provider | Verzending naar Australia | Verzending naar de rest van de wereld |
---|---|---|
FedEx | $12.00 / 5 | $39.00 / 10 |
Australia
FedEx krijgt korting op $12.00 bij bestellingen met 2 of meer artikelen
Rest van de wereld
FedEx krijgt korting op $39.00 bij bestellingen met 2 of meer artikelen
|
||
Registered Shipping | $9.00 / 10 | $16.00 / 21 |
Australia
Registered Shipping krijgt korting op $9.00 bij bestellingen met 2 of meer artikelen
Rest van de wereld
Registered Shipping krijgt korting op $16.00 bij bestellingen met 2 of meer artikelen
|
sedaopals
Discover the magic of opals at SedaOpals, where every stone tells a unique story. Paul Sedawie, the heart and soul of SedaOpals, began his journey with a humble piece of boulder rough at 14, sparking a lifelong passion for these mesmerizing gemstones. With over 40 years in the opal industry, Paul’s dedication has taken him from the rugged landscapes of Lightning Ridge to prestigious gem shows around the world.
Paul, a former president of the Opal Association and an author of several opal books, shares his vast knowledge and passion with enthusiasts globally. He’s even made the largest donation of opalized fossils and curiosities to the Australian Opal Centre at Lightning Ridge.
At SedaOpals, Paul and his sons offer a meticulously curated collection of opals, each handpicked for its exceptional beauty and character. Whether you’re a seasoned collector or new to the world of opals, you’ll find a stunning array of black opals, boulder opals, and crystal opals to explore.
Join us in celebrating the timeless beauty and craftsmanship of opals. Welcome to SedaOpals, where every opal is a piece of art.
Mermaid Beach , Australia
Geverifieerd
44282 feedback
-
Positief
Thank you!
-
Positief
I can't wait to get the beauty and show it off lol but I hope to see more beautiful Pieces from you all
-
Positief
Fast shipping THX
-
Positief
Opals look great. Quick shipping Thx
5%
Coupon code SEDADEALS
Geldig tot
2nd Jan 2025
Audit
Met het Opal Sheriff -programma kunnen onze leden een audit voor elk product aanvragen. Deze audit wordt uitgevoerd door een onafhankelijke Gemologist die de nauwkeurigheid van de artikelbeschrijving en afbeeldingen beoordeelt.
Verzendgegevens
Verzenden:
$16.00 21 dagen via Registered Shipping
Schepen van:
Australia
Betalingsmogelijkheden
Deze verkoper voegt 10.00% belasting toe aan transacties in Australia .
Overzicht
Vermeldingstype :
Standard
Product-ID :
1149640
Begint : 19th December 2024 05:04 pm PST
* Alle prijzen zijn in USD