Opals
Gemstones
Jewelry
Coins
$75.00 USD
Prijs
2950
9
77 cts Andamooka Rainbow Matrix Rough [SO1124](a)
2950
9
- SKU
- Afmetingen (mm)
- 40.000 x 28.000 x 7.000mm
- Gewicht (cts)
- 77.000
- Type
- Rough
- Kleuren
-
ANDAMOOKA RAINBOW MATRIX ROUGH
We bought this from a miner who roughly treated it and only cut the gem pieces. There was 300 kilos in this parcel which took him years to collect. . As it is from different opal fields around andamooka you will find some variation in absorbency when treated.
This is a natural opal treated so it becomes black and is called Andamooka Rainbow matrix opal- .. You can cut as stones or leave as specimen or for carvings. but you will have to re treat if you take too much away. Check that there isnt another colour bar in the rough you can expose that may be better than the top.
You may see black spots which is usually blackened sugar or oil which will come off. The miner has just roughly treated and rubed them down.
Mined in Andamooka Sth Australia
We have taken the photo of the rough wet! We have cut stones from this parcel which are listed in sedaopals.
All rough does have a element of a gamble as some may treat better then others but this has been treated to show what the colour will be like.
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS-BUT YOU CAN TRY OIL IF YOU LIKE
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in aceton for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
You may have to treat a stone a few times to get the desired result.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results if the material is porous
-
POLISHING
The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
We have more rough in our sister site SEDA ROUGH OPALS but you can only combine here with shipping [sorry not set up to work between stores}
We bought this from a miner who roughly treated it and only cut the gem pieces. There was 300 kilos in this parcel which took him years to collect. . As it is from different opal fields around andamooka you will find some variation in absorbency when treated.
This is a natural opal treated so it becomes black and is called Andamooka Rainbow matrix opal- .. You can cut as stones or leave as specimen or for carvings. but you will have to re treat if you take too much away. Check that there isnt another colour bar in the rough you can expose that may be better than the top.
You may see black spots which is usually blackened sugar or oil which will come off. The miner has just roughly treated and rubed them down.
Mined in Andamooka Sth Australia
We have taken the photo of the rough wet! We have cut stones from this parcel which are listed in sedaopals.
All rough does have a element of a gamble as some may treat better then others but this has been treated to show what the colour will be like.
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS-BUT YOU CAN TRY OIL IF YOU LIKE
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in aceton for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
You may have to treat a stone a few times to get the desired result.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results if the material is porous
-
POLISHING
The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
We have more rough in our sister site SEDA ROUGH OPALS but you can only combine here with shipping [sorry not set up to work between stores}
- SKU
- Afmetingen (mm)
- 40.000 x 28.000 x 7.000 mm
- Gewicht (cts)
- 77.000
- Type
- Rough
- Kleuren
-
ANDAMOOKA RAINBOW MATRIX ROUGH
We bought this from a miner who roughly treated it and only cut the gem pieces. There was 300 kilos in this parcel which took him years to collect. . As it is from different opal fields around andamooka you will find some variation in absorbency when treated.
This is a natural opal treated so it becomes black and is called Andamooka Rainbow matrix opal- .. You can cut as stones or leave as specimen or for carvings. but you will have to re treat if you take too much away. Check that there isnt another colour bar in the rough you can expose that may be better than the top.
You may see black spots which is usually blackened sugar or oil which will come off. The miner has just roughly treated and rubed them down.
Mined in Andamooka Sth Australia
We have taken the photo of the rough wet! We have cut stones from this parcel which are listed in sedaopals.
All rough does have a element of a gamble as some may treat better then others but this has been treated to show what the colour will be like.
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS-BUT YOU CAN TRY OIL IF YOU LIKE
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in aceton for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
You may have to treat a stone a few times to get the desired result.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results if the material is porous
-
POLISHING
The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
We have more rough in our sister site SEDA ROUGH OPALS but you can only combine here with shipping [sorry not set up to work between stores}
We bought this from a miner who roughly treated it and only cut the gem pieces. There was 300 kilos in this parcel which took him years to collect. . As it is from different opal fields around andamooka you will find some variation in absorbency when treated.
This is a natural opal treated so it becomes black and is called Andamooka Rainbow matrix opal- .. You can cut as stones or leave as specimen or for carvings. but you will have to re treat if you take too much away. Check that there isnt another colour bar in the rough you can expose that may be better than the top.
You may see black spots which is usually blackened sugar or oil which will come off. The miner has just roughly treated and rubed them down.
Mined in Andamooka Sth Australia
We have taken the photo of the rough wet! We have cut stones from this parcel which are listed in sedaopals.
All rough does have a element of a gamble as some may treat better then others but this has been treated to show what the colour will be like.
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS-BUT YOU CAN TRY OIL IF YOU LIKE
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in aceton for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
You may have to treat a stone a few times to get the desired result.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results if the material is porous
-
POLISHING
The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
We have more rough in our sister site SEDA ROUGH OPALS but you can only combine here with shipping [sorry not set up to work between stores}
| Verzend provider | Verzending naar:land | Verzending naar de rest van de wereld |
|---|---|---|
| FedEx | $12.00 / :dagen dagen | $39.00 / :dagen dagen |
|
:land
FedEx wordt verdisconteerd tot $12.00 bij bestellingen met 2 of meer artikelen
Rest van de wereld
FedEx wordt verdisconteerd tot $39.00 bij bestellingen met 2 of meer artikelen
|
||
| Registered Shipping | $9.00 / :dagen dagen | $16.00 / :dagen dagen |
|
:land
Registered Shipping wordt verdisconteerd tot $9.00 bij bestellingen met 2 of meer artikelen
Rest van de wereld
Registered Shipping wordt verdisconteerd tot $16.00 bij bestellingen met 2 of meer artikelen
|
||
sedaopals
Discover the magic of opals at SedaOpals, where every stone tells a unique story. Paul Sedawie, the heart and soul of SedaOpals, began his journey with a humble piece of boulder rough at 14, sparking a lifelong passion for these mesmerizing gemstones. With over 40 years in the opal industry, Paul’s dedication has taken him from the rugged landscapes of Lightning Ridge to prestigious gem shows around the world.
Paul, a former president of the Opal Association and an author of several opal books, shares his vast knowledge and passion with enthusiasts globally. He’s even made the largest donation of opalized fossils and curiosities to the Australian Opal Centre at Lightning Ridge.
At SedaOpals, Paul and his sons offer a meticulously curated collection of opals, each handpicked for its exceptional beauty and character. Whether you’re a seasoned collector or new to the world of opals, you’ll find a stunning array of black opals, boulder opals, and crystal opals to explore.
Join us in celebrating the timeless beauty and craftsmanship of opals. Welcome to SedaOpals, where every opal is a piece of art.
:stad land
Geverifieerd
43800e feedback
![18.74 CTS PARCEL BOULDER WOOD FOSSILS [BMB422]](https://liveplatforms-production.b-cdn.net/tenants/oa/uploads/images/955000-959999/956307/5f9a1d2aea3f8.jpg?width=480&aspect_ratio=1001%3A1000)
![94 CTS KOROIT MATRIX PARCEL DEAL [BMA4026 ]](https://liveplatforms-production.b-cdn.net/tenants/oa/uploads/images/325000-329999/327822/327822_1350273703.jpg?width=480&aspect_ratio=1001%3A1000)
5%
Coupon code SEDADEALS
Geldig tot
23rd Nov 2024
Audit
Dit product is gecontroleerd door een Opal Sheriff en zij hebben het volgende gevonden:
-
Beschrijving Nauwkeurig
-
Foto's Nauwkeurig
Comments
This verified seller has provided accurate and complete information on this opal
Deze audit is aangevraagd :datum
Laatst bijgewerkt: datum
Verzendgegevens
Verzenden:
$16.00 21 dagen via Registered Shipping
Schepen van:
Australia
Betalingsmogelijkheden
Deze verkoper voegt 10.00% belasting toe aan transacties in Australia.
Overzicht
Vermeldingstype :
Standard
Product-ID :
1156135
Begint : 10th November 2024 02:44 pm PST
* Alle prijzen zijn in:valuta
