Opals
Gemstones
Jewelry
Coins
無保留Gem Rock Auctions
無保留Jewelry Auctioned
無保留Coins Auctioned
$44.00 USD
預計建議零售價：rrp
177.40 CTS ANDAMOOKA ROUGH SLAB -IDEAL FOR EARRINGS [BY8991]
2510
9
- 存貨單位
- 尺寸（毫米）
- 45.000 x 42.000 x 7.000mm
- 重量 (cts)
- 177.400
- 類型
- Rough
- 顏色
-
ANDAMOOKA MATRIX ROUGH SLAB
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural andamooka matrix rough slab.We have treated only once to show the colour bars. This piece is ideal for cutting earrings as the colour bar is in stripes and you can cut a few sets out and re treat for stunning earrings. There is a lot of wastage in the bulk rough we buy so we only pre shape for you.
You can reshaped it or cut into smaller stones but you will have to retreat it.
Mined in Andamooka South Australia
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Preshape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in acetone for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DO NOT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or Pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results on porous materiel
This material is very solid
-
POLISHING
The surface is usually porous porous so its hard to get a good finish but this should give good results and you may be able to polish as is..
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural andamooka matrix rough slab.We have treated only once to show the colour bars. This piece is ideal for cutting earrings as the colour bar is in stripes and you can cut a few sets out and re treat for stunning earrings. There is a lot of wastage in the bulk rough we buy so we only pre shape for you.
You can reshaped it or cut into smaller stones but you will have to retreat it.
Mined in Andamooka South Australia
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Preshape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in acetone for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DO NOT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or Pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results on porous materiel
This material is very solid
-
POLISHING
The surface is usually porous porous so its hard to get a good finish but this should give good results and you may be able to polish as is..
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
- 存貨單位
- 尺寸（毫米）
- 45.000 x 42.000 x 7.000 mm
- 重量 (cts)
- 177.400
- 類型
- Rough
- 顏色
-
ANDAMOOKA MATRIX ROUGH SLAB
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural andamooka matrix rough slab.We have treated only once to show the colour bars. This piece is ideal for cutting earrings as the colour bar is in stripes and you can cut a few sets out and re treat for stunning earrings. There is a lot of wastage in the bulk rough we buy so we only pre shape for you.
You can reshaped it or cut into smaller stones but you will have to retreat it.
Mined in Andamooka South Australia
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Preshape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in acetone for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DO NOT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or Pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results on porous materiel
This material is very solid
-
POLISHING
The surface is usually porous porous so its hard to get a good finish but this should give good results and you may be able to polish as is..
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
[SAME TREATMENT APPLIES TO FAIRY OPAL]
This is a natural andamooka matrix rough slab.We have treated only once to show the colour bars. This piece is ideal for cutting earrings as the colour bar is in stripes and you can cut a few sets out and re treat for stunning earrings. There is a lot of wastage in the bulk rough we buy so we only pre shape for you.
You can reshaped it or cut into smaller stones but you will have to retreat it.
Mined in Andamooka South Australia
TREATMENT FOR ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Preshape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in acetone for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DO NOT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or Pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
In the learning section of opal actions there is details on how to treat with acid and sugar but this sugar only gets good results on porous materiel
This material is very solid
-
POLISHING
The surface is usually porous porous so its hard to get a good finish but this should give good results and you may be able to polish as is..
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
The weight and size is app
| 運輸商 | 運送至：國家 | 運送到世界其他地區 |
|---|---|---|
| FedEx | $12.00 / ：幾天天 | $39.00 / ：幾天天 |
|
：國家
FedEx訂單折扣為$12.00 2或更多商品
世界其他地區
FedEx訂單折扣為$39.00 2或更多商品
|
||
| Registered Shipping | $9.00 / ：幾天天 | $16.00 / ：幾天天 |
|
：國家
Registered Shipping訂單折扣為$9.00 2或更多商品
世界其他地區
Registered Shipping訂單折扣為$16.00 2或更多商品
|
||
![177.40 CTS ANDAMOOKA ROUGH SLAB -IDEAL FOR EARRINGS [BY8991]](https://liveplatforms-production.b-cdn.net/tenants/oa/uploads/stores/fh5enknthszqznio.png)
-
積極的Beautiful stone. Great dealer.
-
積極的
Beautiful stone. Great dealer.
-
積極的
Beautiful stones. Great dealer.
![SEDA NO RESERVE 2.50 cts mosaic opal triplet pair-ideal earrings ]MULT](https://liveplatforms-production.b-cdn.net/tenants/oa/uploads/images/1155000-1159999/1156159/61ad50e41a9f2.jpg?width=480&aspect_ratio=1001%3A1000)
5%
優惠券代碼 SEDADEALS
有效期至
3rd Apr 2025
審計
Opal Sheriff計畫允許我們的會員要求對任何產品進行審核，該審核由獨立的Gemologist人員完成，該資格人員評估商品描述和圖片的準確性。
送貨細節
船運:
$16.00 21透過Registered Shipping計算天數
發貨自:
Australia
付款方式
該賣家在Australia交易中加入了10.00%稅。
概述
列表類型 :
Standard
產品編號 :
905423
開始 : 13th March 2025 09:15 pm PDT
* 所有價格均以：貨幣為單位
![36 grams Andamooka rainbow matrix rough [BZ623]](https://liveplatforms-production.b-cdn.net/tenants/oa/uploads/images/1115000-1119999/1117945/613eaa2f4c0b6.jpg?width=480&aspect_ratio=1001%3A1000)