87 grams high grade fairy opal rough untreated -oxidized [BZ760] cutrm
- 存货单位
- 尺寸(毫米)
- 90.000 x 60.000 x 57.000mm
- 重量 (cts)
- 435.000
- 类型
- Rough
- 颜色
-
NATURAL UNTOUCHED UNTREATED
NOW YOU CAN HAVE SOME FUN DISCOVERING THE COLOURS.
This is natural untouched fairy opal . This rough has been oxided by time as the out side will be darker than inside but it should treat well and be high yielding with stones once treated. They are ready to be shaped or cut into smaller stones or for earrings etc. We bought a few 44 gallon drums and only selected the pieces showing some colour. There is a large amount of wastage.
It is precious opal embedded in the natural sandstone and mined in Queensland Australia. Only by carbonizing it does it become like black opal. The treatment are listed below
TREATMENTS
--On the opal field the normal treatment is to wrap the stones in aluminum foil with a some sugar and olive oil and throw into the hot coals for 15 minutes in a out side fire. I have tried this with varying success.
-This treatment you could also try with some oil.
You can heat the stones in a oven to 90 degree F for a hour to dry them out
Place gently in a bowl with syrup of sugar. Heat for 8 plus hours but not to boiling as you will loose the water so the sugar seeps in to the stone-i once left for over a week and had good results.
Wrap in aluminum foil and heat to 400 F for 4 hours-you can check earlier. This is best done on a out door bbq kiln or oven.
-You can treated like Andamooka matrix with acid-details are in the learning section on the site.
TREATMENT FOR FAIRY OPAL AND ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in aceton for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
-
POLISHING
This parcel The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
It is similar in appearance to Honduran opal.
- 存货单位
- 尺寸(毫米)
- 90.000 x 60.000 x 57.000 mm
- 重量 (cts)
- 435.000
- 类型
- Rough
- 颜色
-
NATURAL UNTOUCHED UNTREATED
NOW YOU CAN HAVE SOME FUN DISCOVERING THE COLOURS.
This is natural untouched fairy opal . This rough has been oxided by time as the out side will be darker than inside but it should treat well and be high yielding with stones once treated. They are ready to be shaped or cut into smaller stones or for earrings etc. We bought a few 44 gallon drums and only selected the pieces showing some colour. There is a large amount of wastage.
It is precious opal embedded in the natural sandstone and mined in Queensland Australia. Only by carbonizing it does it become like black opal. The treatment are listed below
TREATMENTS
--On the opal field the normal treatment is to wrap the stones in aluminum foil with a some sugar and olive oil and throw into the hot coals for 15 minutes in a out side fire. I have tried this with varying success.
-This treatment you could also try with some oil.
You can heat the stones in a oven to 90 degree F for a hour to dry them out
Place gently in a bowl with syrup of sugar. Heat for 8 plus hours but not to boiling as you will loose the water so the sugar seeps in to the stone-i once left for over a week and had good results.
Wrap in aluminum foil and heat to 400 F for 4 hours-you can check earlier. This is best done on a out door bbq kiln or oven.
-You can treated like Andamooka matrix with acid-details are in the learning section on the site.
TREATMENT FOR FAIRY OPAL AND ANDAMOOKA MATRIX WITH SUGAR ONLY.
MATERIALS
250 grams glucose,white castor sugar,pot or pressure cooker,plastic tweezers.
STEPS
-Pre shape the material
- Thoroughly dry the material in oven sun or hairdryer. You can also soak in aceton for 10 minutes to dry the stones out.
- Put water in pot on low temperature and add glucose and castor sugar. DO NOT BOIL.
-Place warmed stones into warm solution and cover the stone with liquid.
-leave on low temperature for 24 hours but DONT BOIL.
-Remove with tweezers and let cool.Use a paper town to wipe away access.
The next steep is to carbonize the sugar in the stone. Place the stones on a metal or pyrex dish and place in a kiln at 500 F degrees for one hour.This will burn or carbonize the sugar in the stone.
_When the stones have cooled clean on a grinding wheel.
Remember to take all precautions with gloves and mask and clothing with good ventilation.
This is a natural product so results may vary a bit due to how porous the sandstone is. Some material will have to be treated a few times to get good results. You can also experiment with various temperatures as i like to cook with lower temperatures.
Remember to have fun!
WE HAVE TAKEN THE PHOTO WITH THE ROUGH WET.
-
POLISHING
This parcel The surface is porous so its hard to get a good finish.
You can polish as a natural stone or coat it with resin to get a better finish.
We suggest a polymer resin as its stable.inert and nontoxic and dosent yellow..Check out our listings of fairy opal polished in sedaopals.Some of there were polished in china under vacume with a amazing finish.
We have also used mono-compontent thermo set resin,cynoacrylates and 2 parts resin but these can turn yellow over time. ive even heard of nail polished used and hardened under uv lights.
It is similar in appearance to Honduran opal.
运输商 | 运送至:国家 | 运送到世界其他地区 |
---|---|---|
FedEx | $12.00 / :几天天 | $39.00 / :几天天 |
:国家
FedEx 对包含 2 或更多商品的订单折扣为 $12.00
世界其他地区
FedEx 对包含 2 或更多商品的订单折扣为 $39.00
|
||
Registered Shipping | $9.00 / :几天天 | $16.00 / :几天天 |
:国家
Registered Shipping 对包含 2 或更多商品的订单折扣为 $9.00
世界其他地区
Registered Shipping 对包含 2 或更多商品的订单折扣为 $16.00
|
-
积极的
Thank you for upgrading the shipping to FedEx! Your generosity is greatly appreciated. I believe natural opals are among the few gemstones that will retain their value over time. Their mesmerizing play of colors never ceases to amaze me.
-
积极的
Thank you for upgrading the shipping to FedEx! Your generosity is greatly appreciated. I believe natural opals are among the few gemstones that will retain their value over time. Their mesmerizing play of colors never ceases to amaze me.
-
积极的
Hi, hello I got my items (Opal Parcel) today afternoon. I saw them and admired itunder strong cold LED Light. So huge! l like and love it so much. Thank you very very much. Have a great good time. Best regards from, Oli